Six points that ordinary consumers need to pay att

2022-07-22
  • Detail

When the overall cabinet is increasingly becoming a decoration fashion, facing the products with different styles in the cabinet store, how should consumers choose? Some experts remind that, in fact, although many products have similar appearance, similar style and the same color, there are great differences in internal quality. In addition to the different material selection of cabinets, the quality of cabinets produced by professional large factories with automatic mechanized assembly lines is also very different from that produced by small factories with manual workshops

when the overall cabinet is increasingly becoming a decoration fashion, facing products with different styles in the cabinet store, how should consumers choose? Some experts remind that, in fact, although many products have similar appearance, similar style and the same color, there are great differences in internal quality. In addition to the different material selection of cabinets, the quality of cabinets produced by professional large factories with automatic mechanized assembly lines is also very different from that produced by small factories with manual workshops

vantage integral cabinet Mona Lisa tiles

as ordinary consumers, it is necessary to “ Six look ”:

first, look at the edge banding of plates. It is understood that the edge banding of high-quality cabinets is fine, smooth, and feels good. The sealing line is straight and smooth, and the joints are fine. Professional manufacturers use linear edge banding machine to complete the processes of edge banding, head breaking, edge trimming, chamfering, polishing, etc. at one time, the gluing is uniform, the pressure of pressing and pasting edge banding is stable, and the accuracy of processing size can be adjusted to the most appropriate position to ensure the most accurate size. However, small workshops use brushes to apply glue, manually press and seal edges, use castor knives to repair edges, and use manual polishing machines to polish. Due to uneven pressure, many places are not firm, and formaldehyde and other toxic gases will volatilize into the air

second, look at punching. Nowadays, panel furniture is assembled by three in one connectors, which requires a lot of positioning connection holes on the plate. The matching and accuracy of the hole position will affect the structural firmness of the cabinet. Professional manufacturers use multiple rows of drills to complete several holes on the edge and surface of a board at one time. These holes are a positioning benchmark, and the dimensional accuracy is guaranteed. Small manual factories use row drills, even pistol drills, which have large dimensional errors

third, look at the cutting board. Cutting board is also called the cutting of board, which is the first process of cabinet production. Large professional enterprises use electronic cutting saws to input processing dimensions through computers, which control the dimensional accuracy of material selection, and can process several plates at a time. The performance of the equipment is stable. The dimensional accuracy of the plates produced is very high, the tolerance unit is in microns, and there is no stubble on the edge of the plates. However, small manual cutting saws used in small workshops have large dimensional errors and often stubble collapse

fourth, look at the door panel. The door panel is the face of the cabinet, which is as important as the human face. Door panels produced by small factories are prone to moisture and deformation due to improper treatment of base materials and surface processes

v. look at the assembly effect of the whole set of cabinets. Any dimensional error in the production process will be reflected in the door panel. The door panel produced by professional large factories is horizontal and vertical, and the gap between the doors is even, while the door panel produced by small factories will have uneven door seams, uneven gap, large and small

VI. although the slide rail of the drawer is a small detail, it is an important part that affects the quality of the cabinet. Due to the size error of the hole position and the plate, there is an error in the installation size of the slide rail, resulting in the drawer pulling is not smooth or the left and right are loose. Pay attention to whether the drawer gap is even

广州精神心理医院

柳州男科医院

成都性病医院

Copyright © 2011 JIN SHI